Xinxiang Magicart Cranes Co., LTD
Xinxiang Magicart Cranes Co., LTD Promote Client's Business
Add to Cart
Product Description
A travel lift or travelift (also called a boat hoist, boat gantry crane, or boat crane) is a specialised type of crane used for lifting boats out of the water and transporting them around docks or marinas.These cranes allow boats with masts or tall superstructure to be transported around hard stands as the tall upper structure can pass through the open end of the crane framework before lifting and after setting down.
Travel lifts typically have two rectangular side frames joined by a beam across one end. The lift is mobile with four groups of steerable wheels, one at each corner. Boats are typically lifted using straps, slung between the two sides which can be passed under boats when either in the water or on the hard stand. Steel wire cables on winches are used to lift the boat.
Drawing and Specification
| Model | Capacity | Clear Height | Clear Width |
| DB 10 | 10T | 2m~9m | 3m~12m |
| DB 20 | 20T | 2m~9m | 3m~12m |
| DB 30 | 30T | 2m~9m | 3m~12m |
| DB 50 | 50T | 2m~9m | 3m~15m |
| DB 70 | 70T | 2.5m~12m | 3m~15m |
| DB100 | 100T | 2.5m~12m | 3m~15m |
| DB150 | 150T | 3m~15m | 3m~18m |
| DB200 | 200T | 3m~15m | 3m~18m |
| DB250 | 250T | 3m~15m | 3m~18m |
| DB300 | 300T | 5m~20m | 5m~25m |
| DB400 | 400T | 5m~20m | 5m~25m |
| Customized | Customized | Customized |
Main Features
Environmental Conditions
1. The power source is three-phase alternating current,rated frequency is 50HZ,rated voltage is 380V.
2. The working environment temperature ranges from -20℃ to +45℃ and the relative humidity is no lower than 95%(with dew).
3. In-service, the wind speed should be no higher than 20m/s; out-of-service, the wind speed should be no higher than 44m/s.
4. The working class is A6-A7.
5. The gradient of crane traveling floor should be less than 1% and part of that should be no more than 3%.
6. The crane which has the special requirement for working conditions, can be manufactured following the contracts.
Package and Delivery
Typical Project
Installation and Commissioning
Product Certificate
1. Is your product customized?
Thanks for your question. Yes, because the working condition are different, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick and accurate quotation.
2. What’s the information should I provide when inquiry?
Thanks for your question. The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.
3. How many operating methods for my selection?
Thanks for your question. The standard operating methods we provide is pendent controller with push buttons. Meanwhile, we can also provide the remote control with push buttons and the cabin (space capsule seat) control with joystick. You can choose any of them, just tell us!
4. What’s the max lifting capacity of the crane?
Thanks for your question. The max Lifting capacity of our standard crane are up to 450 ton. If this can’t satisfy your working requirement. Please contact us for special customized.
5. The space of my workshop is limited, can the crane ok for mine?
Thanks for your question. For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer.
6. Can the crane work in hazardous environment?
Thanks for your question. This type product is just for application in general manufacturing workshop. For hazardous environment, please consult our professional sales manager.
7. Do your side can provide lift tools?
Thanks for your question. Yes, we can provide any kinds of lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement's.